- Acid rain
- Damage of film caused by bird droppings
- Car wash Scratches
- Color Fade with time
- Stone chips
- Tar spots
- Water spotting
- Adhesion Problems
- Dirt and dust in basecoat
- Dirt and dust in Clear Coat
- Edge Appearance
- Wrinkling of top coats
- Loss of Gloss on Clear Coats
- Moisture blisters
- Orange peel
- Pinholes in polyester affecting the final coat
- Solvent popping
- Water stains
- Sanding scratches appear on topcoat
- Silver halo effect during basecoat application
- Poor Adhesion – POLYESTERS
- Poor opacity of basecoats/topcoats
- Clear/ Topcoat runs
- Small black spots on basecoat (also known as salt and pepper effect)
- Poor adhesion on plastic parts
Wrinkling of top coats
OriginHappens when we apply two chemically incompatible substrates one before the other.
Excessive film build.
Applying over an under cured substrate.
Wrong use of wet on wet application system.
AvoidanceAvoid over spraying when repairing.
Always use products according to specifications.
Allow enough flash off time.
Always use recommended hardeners or thinners.
How to fix the problemClean the surface from all coatings till metal stage and repaint.
Use BODY P962 ISOLATOR if unsure of the substrate to be repainted.