- Acid rain
- Damage of film caused by bird droppings
- Car wash Scratches
- Color Fade with time
- Stone chips
- Tar spots
- Water spotting
- Adhesion Problems
- Dirt and dust in basecoat
- Dirt and dust in Clear Coat
- Edge Appearance
- Wrinkling of top coats
- Loss of Gloss on Clear Coats
- Moisture blisters
- Orange peel
- Pinholes in polyester affecting the final coat
- Solvent popping
- Water stains
- Sanding scratches appear on topcoat
- Silver halo effect during basecoat application
- Poor Adhesion – POLYESTERS
- Poor opacity of basecoats/topcoats
- Clear/ Topcoat runs
- Small black spots on basecoat (also known as salt and pepper effect)
- Poor adhesion on plastic parts
OriginClear coat or topcoat were insufficiently cured.
High build of the film, insufficient drying time.
Incorrect hardener mix.
Improper clear / hardener mixing ratio.
AvoidanceFollow the instructions for use according to the technical specification by the manufacturer.
How to fix the problem.
Dry the damaged area thoroughly.
Remove all the stains by sanding.