- Acid rain
- Damage of film caused by bird droppings
- Car wash Scratches
- Color Fade with time
- Stone chips
- Tar spots
- Water spotting
- Adhesion Problems
- Dirt and dust in basecoat
- Dirt and dust in Clear Coat
- Edge Appearance
- Wrinkling of top coats
- Loss of Gloss on Clear Coats
- Moisture blisters
- Orange peel
- Pinholes in polyester affecting the final coat
- Solvent popping
- Water stains
- Sanding scratches appear on topcoat
- Silver halo effect during basecoat application
- Poor Adhesion – POLYESTERS
- Poor opacity of basecoats/topcoats
- Clear/ Topcoat runs
- Small black spots on basecoat (also known as salt and pepper effect)
- Poor adhesion on plastic parts
OriginMoisture penetration on the coated surface through broken or damaged areas.
Exposed bare metals.
High humidity climates/areas influence the degree of corrosion.
AvoidanceEspecially in winter time frequent polishing is necessary for best protection.
Well isolate any broken or bare metals.
How to fix the problemRemove the affected paint areas and sandblast if necessary.
Use neutralizing acid on the sandblasted area and refinish with an approved system.